RockShox's Pike RCT3 Solo Air is the ultimate fork for all-mountain and enduro riding. Burly 35mm stanchions, magnesium lowers, and a lightweight hollow forged aluminum crown deliver supreme stiffness to rip down the toughest enduro courses. When the bumps come hard and fast, RockShox's Charger damper keeps the fork high in the travel to maintain proper bike geometry, all while soaking up everything from flowy dirt ribbons to crazy rock-strewn goat paths. The RCT3 three-position switch changes between full travel, lockout and threshold modes so you can save your legs on a transition stage and open it up to pin the next timed downhill.
When a fork isn’t designed well, you feel it from the minute you start your ride. That is why Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.7 Carbon Disc Cyclocross Fork. It makes sure you don't have to worry about uncomfortable chatter or vibration while experiencing an astoundingly plush ride. They've accomplished this by using proven technologies like a delightfully stiff and compliant UD carbon fiber construction, not to mention the use of disc brake mounts on their CX forks. It all results in an enhanced riding experience and adds up to performance that you can count on. - Axle to Crown Length: 392.2mm - Brake Mount (Fork): Post Mount 140mm - Front Axle: 10mm x 100mm - Material: Carbon - Maximum Tire Clearance (Fork): 48 - Offset: 47mm - Rotor Size (Fork): 160mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Tube Length (mm): 300mm - Wheel Size: 700c
The Whisky No.7 RD thru-axle fork is a thoroughly modern road fork for road bikes with tapered steerer tubes. It features a 12mm thru-axle for precise handling, clearance for high-volume road tires, and clean internal cable routing. Flat mount brake capability offers clean caliper fitment and backwards compatality with post mount brakes using adaptors.
The Whisky No.7 RD fork is a modern caliper road fork for road bikes with tapered steertubes. Their No.7 RD fork features a standard 9mm x 100mm QR axle. It offers low weight, precise handling, and clearance for 28c tires. This is a perfect upgrade fork for in lieu of a steel or alloy fork, and makes a great replacement fork for existing carbon product.
Whisky's No.9 CX Flat Mount is the updated version of the original No.9 CX fork. Building on the precise tracking and braking performance of their original, they've pushed performance even further with this fork. Lighter weight, updated fitment and clean lines make for a supremely capable fork. - 12mm Thru Axle - Flat Mount Disc Brake - Tapered Steerer Tube - 700x42c/650x47c clearance - Hidden, Removable Fender Mounts
Whisky poured over every detail, pushed the limits, and broke new ground during the creation of the No.9 Fat Rigid Carbon Mountain Bike Fork. It eliminates uncomfortable chatter and vibration over rough terrain, so you experience an astoundingly plush ride with precise handling. They've accomplished this by using a delightfully stiff and compliant UD carbon fiber construction, a tapered steerer, and a 15 x 150mm thru-axle. It all results in an enhanced riding experience and adds up to performance that you can count on. - Post style brake mount - DT RWS Axle included - UD full carbon construction - Axle to Crown Length: 480mm - Brake Mount: Post Mount 160mm - Crown Race: 40 - Front Axle: 15 x 150mm - Material: Carbon - Offset: 51mm - S.H.I.S. Stem Clamp Diameter: 28.6 - Steerer Type: 1-1/8 – 1-1/2-inch tapered - Weight: 750 grams - Wheel Size: 26-inch
The Big Fat Dummy fork is made of the same 4130 Chromoly steel as its frame counterpart and accepts tires up to 26 x 5.25. - 15mm x 150mm thru-axle - Butted and tapered blades - Barrel bosses at the dropouts and crown - Mid-blade thru-blade eyelets - Triple bottle bosses on both fork legs
Whether you want to go touring, to the Saturday 'cross race, commute around town, head out on a long road ride, or all of the above, Surly's Cross-Check fork has you covered. Crafted from 4130 chromoly steel, it features fender and rim brake mounts, and mid-leg eyelets for mounting a rack. Powdercoated black for style.
The ECR fork is much like the Ogre fork. Both are CroMoly 29er forks. Both work with frames designed for 80mm-travel suspension forks. Both feature 51mm I.S. disc caliper mounts, brake line guides, accommodations for a rack and fender, and 2 sets of cage mounts (one on each leg) that let you mount large size or standard water bottle cages. Both are designed to run just about any combination of parts and accessories you'd want on a fork and are finished in durable black powdercoat. The only real differences are 1) ECR is disc brake only, and 2) ECR's offset is 47mm, 5mm more than Ogre's. - Axle-to-crown: 468mm - Offset: 47mm - Steerer: 260mm, 1-1/8" straight - Tire Clearance: 29 x 3.0" - Weight: 3.1 lb (1.4kg) uncut
Designed around Surly's updated Krampus frame (but also employed on the updated Karate Monkey frames as well), this fork has 15mm thru-axle dropouts spaced at 110mm and clearance for up to a 29 x 3.0-inch tire. To accommodate such big tires it's got a longer axle-to-crown measurement than our Ogre or Karate Monkey forks, making it a perfect rigid fork option for lots of 29ers out there. The Krampus fork's blades were designed and manufactured specifically to play well with the unique forces such a long fork with big tires will encounter, and the steer tube is standard 1-1/8-inch threadless. It has line guides for a disc brake line as well as thru-blade eyelets and Three-Pack bosses on both fork legs. - Axle-to-crown: 483mm - Offset: 47mm - Steerer: 260mm - Tire Clearance: 29 x 3.0-inch - Weight: 1180g uncut
Classic 100% chromoly construction and engineered for modern accessories, that's Surly's Long Haul Trucker Disc Fork. Its beautiful curved blades are brazed to a lovely and tough investment-cast crown and dropouts. There are disc-brake mounts and eyelets for fenders and mounts for a standard or low-rider rack. Plus, it boasts a tough powdercoat finish that's tres chic. - 100% CroMoly steel construction, curved blades, powdercoated - Extensive mounting options with threaded eyelets in four locations: double eyelet dropouts, mid-blade, and a pair drilled into the fork crown - 51mm IS disc brake mount - 26" has clearance for a 2.1" tire
Classic construction outfitted for modern accessories - that's Surly's Long Haul Trucker Fork. Curved blades are brazed to a beautiful investment-cast crown and dropouts. There are rim-brake posts, eyelets for fenders and mounts for standard and low-rider racks. Plus, the tough powdercoat finish is très chic.
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. The fork’s new crown provides ample clearance for 26 x 2.1 tires and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 26" = 376mm - Offset: 45mm - Steerer: 26" (42–54cm frames) = 300mm; 26" (56–62cm frames) = 400mm - Tire Clearance: 26 x 2.1" - Weight: 26" = 2.1 lb (0.97kg) uncut
The Long Haul Trucker fork is designed to mount racks and fenders and to haul stuff. Offered in 26? and 700c wheel sizes, the fork’s new crown provides ample clearance for 700c x 50mm tires, and sports threaded eyelets in four locations (dual dropout, midblade and fork crown) to provide more options for mounting stuff, from racks to whatever. Options galore. Curved blades, CroMoly steel. 1-1/8-inch threadless steer tube. - Axle-to-crown: 700c = 390mm - Offset: 45mm - Steerer: 700c (56–64cm frames) = 350mm - Tire Clearance: 700c x 45mm - Weight: 700c = 2.3 lb uncut
This beauty here was designed alongside Surly's Midnight Special frame. In an effort to shed a few grams (it's for a road bike after all), they opted to utilize a unicrown design rather than a lugged one. In addition to the weight savings, it also looks really nice — don't you think? Like the Midnight Special frame, this fork is equipped with modern road standards like flat mount disc brakes and a 12 x 100mm thru-axle. For increased versatility, it has braze-ons for fenders and racks (including mid-blade!). - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets - Rack and fender eyelets at the dropout - 12 x 100mm thru-axle - Clearance for 27.5 x 2.32 or 700c x 42mm tires
Surly's Moonlander Fork has clearance for a 26 x 4.7-inch wide tire. It accepts specialty front hubs with a rear disc offset or 135mm rear hubs. It takes a front disc-brake adapter so you can run any brakes that come in a traditional front/rear set without having to break up a set. This fork features large-diameter, thin-wall chromoly blades that taper for a smooth and supple ride. And, it's got standard and low-rider rack mounts and comes in a tough powdercoat finish because it's awesome.
The Ogre fork is non-suspension corrected and will run 29-inch as well as 27.5-inch tire options. Made of 4130 CroMoly, it's got 51mm IS disc mounts, removable cantilever pivots, brake-line guides, low-blade threaded barrel bosses and mid-blade eyelets for a rack. This fork is designed to run disc brakes, fenders and a rack simultaneously. It's got two sets of triple bottle mounts, one on each leg. - Axle to Crown Length: 447 mm - Brake Mount: Canti studs, IS Disc Brake 160 - Crown Race: 30 - Front Axle: 9mm x 100mm - Material: Chromoly Steel - Offset: 43 mm - Steerer Type: Straight 1-1/8-inch - Wheel Size: 29-inch, 27.5+ - Powdercoat finish
Surly's Pacer Fork is a great all around steel road bike fork. Able to accommodate tires up to 32c, or 28c with a fender, this fork will get you where you need to go with a smooth, supple ride. Single eyelets at the dropouts allow for some bolt on parts, and the classic black powdercoat is tres chic.
Designed with the Surly Pack Rat frame, this fork is built with front cargo carrying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 26 x 2.0"
Designed with the Surly Pack Rat frame, this fork is built with front cargo caryying in mind. It’s made from 4130 CroMoly steel and features mid-blade eyelets for mounting a Surly 8- or 24-pack rack (among others). This lugged and brazed fork also includes fender eyelets at the dropouts, internal routing for generator hubs, and cantilever brake pivots. - 100% CroMoly construction, fully brazed crown - Mid-blade thru-blade eyelets for mounting a front rack - Fender eyelets at the dropout - Internal routing for generator hubs - Cantilever/Linear Pull brake mounts - 9mm x 100mm quick-release dropouts - Max tire clearance: 650B x 48c
Replacement disc compatible forks for the Surly Straggler. - Tire Clearance: 50mm (w/o fender) - Weight: 2.4 lb (1.1kg) uncut - Axle-to-crown: 380mm - Offset: 44mm - Steerer: 360mm, 1-1/8" straight
The Straggler fork is very much like the Cross-Check fork — t's a lugged and brazed CroMoly fork with room for 700c tires up to 50mm wide. Both feature fender and rack mount eyelets at the dropouts, mid-blade threaded rack mounts and threaded eyelets on the sides of the crown for accessories. Both deliver a resilient ride and are finished in black powdercoat. The Straggler fork is equipped with a 51mm I.S. disc caliper mount and no accommodation for rim brakes. - Axle-to-crown: 400mm - Offset: 44mm - Steerer: 300mm, 1-1/8" straight (42-58cm), 350mm, 1-1/8" straight (60-62cm) - Tire Clearance: 50mm (w/o fender) Weight: 2.5 lb (1.15kg) uncut
The Troll Fork is just like the one that comes with the Troll frame, a 26-inch wheeled fully geared utility bruiser and cruiser. Like all Surly's forks, it's constructed of CroMoly steel. It sports removable rim brake pivots as well as a 51mm disc caliper mount. The Troll Fork is designed to accept a rack while using a disc brake, via through-blade threaded mounts in two places on each fork blade, and it's even got fender eyelets. - Disc or rim brake compatible - Compatible with disc brakes and rack simultaneously - Fits 26-inch wheels with clearance for a 3.0-inch tire - Steerer Type: Straight 1-1/8-inch - Sleek powdercoat finish
Keep the weight down and your headset snug with the Specialzied Carbon Steerer Tube Plug.
Lighten the mood with Specialized's Chisel Carbon Fatboy Rigid Fork. The uni-directional full carbon monocoque structure with carbon legs, crown, and steerer is featherweight. It's got a 160mm post mount for brakes, an integrated aluminum crown race, and aluminum dropouts that are compatible with 135mm hub and SBC OS28 end-caps for increased stiffness.
The Öhlins RXF 36 fork drafts off of the success of the 34, while bringing more stiffness and room for bigger tires. It operates off of a three-chamber air spring design (two positive and one negative), and it utilizes proprietary TTX damping technology. Combined, this allows both parallel and separated oil flow that controls the overall pressure levels. In a practical sense, this means that the fork is guaranteed to remain high in the travel, while also ensuring smoothness and predictable bump absorption throughout the entire ride. The shape of the spring force is also capable of being adjusted, which allows riders more fine-tuning options for preferences like increased sensitivity without the threat of bottoming out. Öhlins has increased the stanchions to 36mm and upped the spacing to 110mm with an ultra-stiff two-piece alloy crown design. This means that it'll experience less flex for more tire control, while also trimming down on some weight. - Features a three-chamber air spring, with two positive chambers and one negative, allowing for an offset of spring pressure that perfectly mates stiffness with a plush, responsive ride quality. The shape of the spring curve can also be adjusted to increase sensitivity without bottoming out. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and high alloy two-piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 46mm offset for party time on the trail. - 150 and 170mm travel options available. - 15x110mm spacing.
The Ohlins RXF 36 Coil fork uses the same chassis of the RXF 36 fork, keeping the same stiffness, room for bigger tires, and proprietary TTX damping technology, but instead uses high quality coil springs that are easily swapped for various rider weights and it utilizes. This provides a ride with great feel throughout the travel—from small bumps to big hits. - Features a coil spring, with multiple spring rates in 0.9N/mm / 5lb/inch increments, allowing for a plush, linear suspension feel, tuned specific for the riders weight. - TTX (Twin Tube) damping enables separated oil flow, so the fork will always provide the perfect degree of pressure. This way, it stays smooth and high in the travel without compromising bump absorption, traction, or stability. - A tapered alloy steerer and two piece crown ensure high stiffness and tire control with less chassis flex and chassis hysteresis. 36mm stanchions with 51mm offset for party time on the trail. - 150 and 160mm travel options available. - 110 x 15mm spacing makes it compatible with most 29-inch setups.
- Chrome lugged crown with Tange CrMo legs/steerer - 41mm rake - Axle-crown: 365mm - Brake mount: caliper - Steerer: straight - Wheel (legs): 700c (curved)
- Chrome lugged crown with Tange CrMo legs/steerer - 41mm rake - Axle-crown: 365mm - Brake mount: caliper - Steerer: straight - Wheel (legs): 700c (curved)
- Lugged Cross fork to match the Double Cross Cyclocross frames - Lugged crown with Tange CrMo construction - Features eyelets for front rack and braze-ons for low-rider panniers - 44mm rake - Brake mount: cantilever
Page 1 of 3 Next page